Controles de cesto 100% hidráulicos para garantir a máxima confiabilidade e permitir grande precisão nos movimentos.
• Para uma vida útil mais longa e garantida do sistema hidráulico, todos os controles comutáveis pelo cesto e todas as mangueiras hidráulicas posicionadas dentro das lanças que chegam ao distribuidor na torre trabalham em baixa pressão de 25 Bar.
• Controles de emergência do solo.
• Os controles totalmente hidráulicos permitem 2 movimentos simultâneos e proporcionam mais sensibilidade nas manobras progressivas e graduais em relação aos controles eletro-hidráulicos. Os controles totalmente hidráulicos estão livres de qualquer dano aos componentes elétricos causados por tempo chuvoso, umidade, uso frequente, etc.
– As válvulas de bloqueio são montadas diretamente em cada cilindro hidráulico.
• Controla alavancas com retorno automático em posição de repouso. Os movimentos de toda a plataforma são ativados por alavancas, respectivamente posicionadas nos seguintes painéis de controle:
– cesto: placa
de controle da plataforma – torre: placa de controle da plataforma apenas
para emergência – subchassi: placa de controle dos estabilizadores
Subframe:
– made of high-strength structural steel
– welded single box girder type.
– Internal anti-torsion diaphragms.
– Fifth wheel coupling on high-strength plate with through holes, reinforced box.
Stabilizers beams:
– made of high-strength structural steel with welded panels
– independent hydraulic extension
– Automatic, infinitely adjustable stabilizer locking.
Extensible outriggers:
– made of high-strength structural steel with welded panels
– H-type, vertically adjustable large stroke
– Stable, high-strength, inverted box jacks
Fastening to the truck chassis by means of high-strength bolts, tie rods, flanges and screws adapted to the vehicle chassis at the designated points.
Passivated high-capacity hydraulic tank with inlet and outlet filters.
Interlocking ground plates with automatic fastening and ball joint with 15° angle recovery in all directions, made of high-strength, insulating plastic material
Bodywork:
– Made of steel and aluminum
– Storage compartments
– Rear control compartment
– Side access ladder on both sides
– Anti-skid floor in almond-shaped sheet metal
– Closing shutters for accessory compartments
– General control panel with 7″ display
– Mobile control station for stabilizers
– Rear towing hitch
Turret made of welded box-type high-strength structural steel.
Fifth wheel coupling on high-strength plate with through holes, reinforced housing.
Rotation on large diameter steel ball bearings with hardened raceways, grease lubrication.
Connection for double jack Lifting with high-sensitivity double-valve hydraulic control system
Sistema di rotazione realizzato con:
Dual stage planetary gearbox with oil lubrication
Planetary gear of large displacement
rotation control valves
anti-cavitation valves
– shock-absorbing valves
– oil-bath multi-disc negative brake.
Command post attached to the turret with :
sedile ergonomico – ergonomic seat
rollbar di protezione in acciaio e rivestimento in plexiglass – steel roll bar and plexiglass cladding
command station with 7″ display
– communication intercom with the nacelle
Continuous rotation with electro-hydraulic coupling with double sliding contacts, seals, protection IP 55
4″ hydraulic coupling for water passage (optional)
Telescopic boom built in 4 elements, main boom and three extensions.
Telescopic ladder support system (optional)
Water pipeline support and quick coupling system (optional)
Main boom:
– Folded high-strength steel sheet with differentiated thickness
– Stabilising folds
– Anti-torsion section
– Boxed turret attachment
– Boxed attachment for double lifting jack
– Stiffening collars
Extensions boom:
– Folded high-strength steel sheet with differentiated thickness
– Stabilizing folds
– Anti-torsion section
– Exit rope end connection
– Stiffening collars
Extension system
– Double-acting telescopic extension jack with control valve and pressure relief valve
– High-strength steel ropes with multiple strands
– Anti-wear and anti-creep rotation pulleys
– Twist-resistant high-strength steel coupling tangles
– Anti-twist system
– Automatic tension distribution system
– Internal cable guide system for cable and conduit routing
– Internal secondary arm pivot box with pivot jack and articulated system
Lifting system
– Double lifting jack with high-sensitivity double-valve hydraulic control system
– Lifting angle -5° +85°
Secondary boom positioned alongside the telescopic boom articulated in relation to the main boom
– One-piece fixed arm
– Folded high-strength steel sheet with differentiated thickness
– Stabilizing folds
– Anti-torsion section
– Box joint attachment main boom
– Box joint attachment jib
– Stiffening collars
– Telescopic ladder support system (optional)
– Water pipe support and quick coupling system (optional)
Articulation system:
– Articulation jack with hydraulic control system, high-sensitivity overcenter valve
– 145° articulation angle
Jib for articulated fine positioning in relation to secondary boom
– One-piece fixed boom
– Folded high-strength steel sheet with differentiated thickness
– Stabilizing folds
– Anti-twist section
– Box joint attachment secondary arm
– Box joint connection nacelle
– Stiffening collars
– Telescopic ladder support system (optional)
– Water main support and quick coupling system (optional)
Articulation system:
– Articulation jack with hydraulic control system, high-sensitivity overcenter valve
– 270° articulation angle
Ladder for evacuation and rescue operations at height:
– made of anodised high-strength aluminium alloy extrusions
– load capacity of 5 persons (*) distributed along the elements
– automatic synchronisation system of the steps of the main telescopic element
Description of elements
Telescopic access ladder at the side of the turret:
– Non-slip steps
– fixed handrails
– a lockable telescopic element
– one fixed element
Main telescopic ladder at boom side in 4 elements each integral with the corresponding element of the telescopic boom:
– Anti-slip ladders
– fixed handrails
– one fixed element
– three telescopic elements
– automatic step synchronisation system
Fixed ladder with one element integral with the arm
– non-slip steps
– folding handrails
– a fixed element
Fixed ladder alongside jib to an element integral with the jib itself:
– Anti-slip ladders
– fixed handrails
– a fixed element
Element connecting you to the jib:
– Anti-slip ladders
– Jointed
– one element
(*) dependent on the type of installation (see specifications in user and maintenance manual)
• Deck de alumínio
• Escadas ergonômicas montadas na subestrutura para acessar facilmente o piso da plataforma e a cesta
• Pára-choques traseiro
• Suporte para lança em posição de repouso
Multi-purpose basket for rescue and evacuation manoeuvres at height:
– made of high-strength anodised aluminium alloy extrusions and stainless steel
– max. load capacity 4 persons/500 kg – 3 persons/350 kg – 2 persons 250 kg synchronised with corresponding work areas (*)
– automatic levelling system with electronic spirit level and step synchronisation system of the main telescopic element
– Hydraulic levelling jack
– Side access with hinged door with automatic handle
– Front access for evacuation operations
– Rear access for telescopic ladder access (opt)
– +/- 45° rotation by hydraulic actuator
– Electronic load control cell with continuous load scanning
Dimensions:
– Height 1.1m
– Width 2.2m
– Depth 1.0m
Devices:
– Front control panel with impact protection
– 4 seat belt attachments (one for each person)
– Connection for monitor
– Extra connection for external piping
– Cooling system and lower fog extinguishing system (sprinkler)
– Lifting eye (optional)
– Ground support feet
– Pipe shut-off valves
– Additional front tilting stretcher platform dimensions 1.37 m x 0.50 m
– Front-mounted automatic-opening grab rail in combination with stretcher platform
– Power socket 240
– 400V power socket
– Communication intercom with the turret
(*) depending on the type of installation (see specifications in the operation and maintenance manual)
Euroflag 45 Firefighting can be equipped with a piping system to convey the water required for operations from the base of the chassis to the monitor or to the connection outlet in the nacelle.
The configuration can be customized; the standard version consists of:
– inlet connection: 2 x 4″ connections one on each side on the rear of the machine
– outlet connection: 2x connections on the rear, one on each side
– stainless steel and/or aluminum piping through the frame to the base of the turret
– hydraulic coupling with continuous rotation
– quick exhaust and anti-suck valve
– pressure relief valve (12 bar)
– high-strength rubber hoses for connection at joints
– 80 mm aluminum telescopic pipeline with seals at the side of the telescopic boom
– fixed aluminum pipeline alongside the secondary arm
– Electronically controlled monitor (*) with rotation and pivoting
– Shut-off valves in nacelle
– Water mist spray system under the nacelle
The machine is equipped with a hydraulic power and control system consisting of:
– Triple pump with connection to the truck’s PTO consisting of:
– High-strength, anti-corrosion, wear-resistant rubber hydraulic hoses for mobile connections
– Steel hoses for fixed connections
– Passivated high-capacity hydraulic tank
– Exchange and unloading unit equipped with pressure relief and safety valve
– Electric distributor for stabilizers control
– Proportional electronic distributor for controlling main movements
– Proportional electronic distributor for controlling auxiliary movements
– Block and safety valves on all hydraulic actuators flanged
– Bleed valves
– Emergency hand pump
Euroflag 45 is equipped with an electronic control system that connects all the hydraulic actuators and control systems necessary for the safety and movement of the machine using the latest available technology.
The control system is based on a series of electronic control units with communication in CAN BUS technology that take care of the logical management of the machine.
The management system receives from the control systems located in the various points of the machine the signals necessary to establish the geometric and load configuration of the machine in order to control and sequence the movements with the necessary degree of safety.
The main control systems consist of:
– Geometric spot control
– Nacelle load control
– Load control on stabilisers
– Stability control
– Nacelle balancing
– Automatic stabilisation
– Truck Cab Collision Avoidance System
– Anti-collision system stabilisers
– Anti-collision system nacelle with ultrasonic sensors
– GSM remote debugging system
The machine can be controlled via control panels and display screens:
– General control panel for switching on and selecting the control station
– Ground-based 7″ general control display
– Membrane-type push-button stabiliser control panel
– Movement control panel in turret 2x 2-axis joystick, buttons, signalling LEDs
– General control display in turret 7″
– Movement control panel in nacelle 2x 2-axis joystick, buttons, signalling leds
– Control display in nacelle 7″
The control panels in the turret and in the nacelle are identical and replicate all the controls.
The three displays on the ground in the turret and in the nacelle are identical and provide all the information necessary for the safe operation and control of the machine.
Through the controls you can control :
– speed and sequence of movements (proportional)
– speed and sequence of stabilizers (manual)
– automatic stabilization
– automatic opening (open system)
– automatic closing (home system)
– load in nacelle
– working area
– working area
– instantaneous machine position (height, reach and angular position)
Signaling Reports:
– machine footprint (outriggers)
– Machine in transport position (lights in cab)
– PTO engaged (warning lights in cab)
– Alarms and warnings on turret frame and nacelle displays
The machine is equipped with a control bypass system for emergency operation, the standard equipment includes a hand pump for emergency functions.
Various additional motorized emergency devices are available (see other options section)
The machine is equipped with an audio intercommunication system between the control station in the turret and the control station in the nacelle
Reach new heights with safety and confidence
